Browse Our Catalog

Adjustable Wrenches - Page 2 - Super Savings! Save up to 37%


Super Savings! Up to 37% off on Adjustable Wrenches at DLW Veterans Center, Page 2. Top brands include OTC, Martin Tool, Natihusky, WEDO, GearWrench, Dixon Valve & Coupling, Ampco Safety Tools, Mueller-Kueps, Stanley Proto Facom, Starrett, KNIPEX Tools, Klein Tools, Teng Tools, Wright Tool, MAGIC WRENCH, Titan Tools, & NSKK USdenta. Hurry! Limited time offers. Offers valid only while supplies last.



OTC (7309) Heavy-Duty Adjustable Hook Spanner Wrench
OTC (7309) Heavy-Duty Adjustable Hook Spanner Wrench
By OTC
In Stock
$394.95
$247.19
You Save: 37%

mpn: 7309, ean: 0731413002267,

4.5 out of 5 stars with 10 reviews
The OTC 7309 is drop-forged and features extra heavy construction and a 3/4 inch thick 11-position hook jaw that's capable of gripping fasteners from 4-3/4 inch to 12-3/4 inch O.D. Handle is 25-3/4 inch long and 15/16 inch in diameter.Drop-forged and features extra heavy construction and a 3/4 inch thick 11-position hook jaw. Capable of gripping fasteners from 4-3/4 inches to 12-3/4 inches OD. Handle is 25-3/4 inches long and 15/16 inch in diameter.


OTC (885) Adjustable Hook Spanner Wrench
OTC (885) Adjustable Hook Spanner Wrench
By OTC
In Stock
$103.43
$82.74
You Save: 20%

mpn: 885, ean: 0731413006081,

4.9 out of 5 stars with 24 reviews
The OTC 885 is a tool that's needed wherever turret adjusting nuts or packing gland nuts are used. Its capacity is 1-1/2'' to 4''. Its handle is 24'' long 11/16'' diameter.This tool is needed wherever turret adjusting nuts or packing gland nuts are used. Capacity is 1-1/2 inch to 4 inches. Handle is 24 inches long and 11/16 inch diameter.


Martin Tool 0474A SPAN PIN Adjustable Wrench
Martin Tool 0474A SPAN PIN Adjustable Wrench
By Martin Tool
In Stock
$71.41

mpn: 0474A, ean: 0697950141183,

4.4 out of 5 stars with 7 reviews
276-0474A features: -opening type: pin.For pin hole collars lock rings & collets. Adjusts to several size rings or collars. Precision machined pin.


Low High Speed Hand Tool Push Button Latch Standard Set 2 Holes Pink
Low High Speed Hand Tool Push Button Latch Standard Set 2 Holes Pink
By Natihusky
In Stock
$110.00

ean: 0699931323205,

4.6 out of 5 stars with 36 reviews
Working pressure: 0.3MPa 0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure) Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise) Noise: ≤68dB Air consumption: about 56L/min Ratio: 1:1 Max speed of contra angle: 25000rpm/min Air Mortor EX-203C: Supply air pressure: 245-392KPa (2.5-4kgf/CM2) 1:1 Direct Drive 2 holes Max speed 20,000 min-1Contra angle. Low speed 22,000-27,000 rpm.. The shank of the instrument mounted therein is


Wedo Tools Wrench, With Adjustable End, Non-Sparking, Non-Magnetic, Corrosion Resitant Beryllium Copper Alloy 10''
Wedo Tools Wrench, With Adjustable End, Non-Sparking, Non-Magnetic, Corrosion Resitant Beryllium Copper Alloy 10"
By WEDO
In Stock
$86.93

mpn: NS125-1008, ean: 0800564254051,

4.6 out of 5 stars with 23 reviews
We manufacture various tools for industiral usage and home-improvement with highest craftsmanship. Our tools are intended for professional use, but safe and convenient enough for anybody as well.Non-Sparking, Non-Magnetic & Corrosion Resistant. Factory Mutual Approved, GS Approved, Beryllium Copper Alloy. Non-Magnetic for use near highly sensitive magnetic equipment; MRI and Clean Room environments; Corrosion Resistant even in the most severe environments.


GEARWRENCH 9545 4 Piece SAE Reversible Ratcheting Wrench Completer Set
GEARWRENCH 9545 4 Piece SAE Reversible Ratcheting Wrench Completer Set
By GearWrench
SKU: #20126
In Stock
$82.99
$81.13
You Save: 2%

sku: 20126, mpn: 9545N, ean: 0082171954504,

4.0 out of 5 stars with 30 reviews
Our Original Combination Ratcheting Wrench with a reversing mechanism. Includes sizes 13/16 - 1Reversible ratchet SAE wrenches with mirror chrome finish. Reversing lever prevents having to remove and flip wrench to change directions. 15-degree offset for knuckle clearance and easier access. Open end design prevents fastener rounding. Full lifetime warranty.


GEARWRENCH 81275 2 Pc. 1/4'' & 3/8'' Drive 84 Tooth Dual Material Locking Flex Head Teardrop Ratchet Set, Black
GEARWRENCH 81275 2 Pc. 1/4" & 3/8" Drive 84 Tooth Dual Material Locking Flex Head Teardrop Ratchet Set, Black
By GearWrench
In Stock
$84.99

mpn: 81275, ean: 0787854883675,

4.3 out of 5 stars with 7 reviews
2 pc. 1/4'' & 3/8'' drive 84 tooth dual material locking flex head Teardrop ratchet set. 84 tooth full polish chrome handle ratchet.84 tooth full polish chrome handle ratchet. Color: Black. Manufactured in Taiwan.


Dixon Valve 189DH Fire Equipment, Double Head Adjustable Hydrant Wrench, 19-1/2'' Length
Dixon Valve 189DH Fire Equipment, Double Head Adjustable Hydrant Wrench, 19-1/2" Length
By Dixon Valve & Coupling
In Stock
$82.57
$59.87
You Save: 27%

mpn: 189DH, ean: 0089109818020,

4.0 out of 5 stars with 20 reviews
Double head adjustable hydrant wrench. For pentagon hydrant nuts up to 1-7/8'' and square heads up to 1-1/2''. Designed to fit 3/4'' - 6'' rocker lug or pin lug couplings, can also be used for long handle couplings. Ductile iron head with a deeply knurled chrome plated steel handle. Replaceable adjustable jaw is made of manganese bronze. Size: 19-1/2'' length.Double head adjustable hydrant wrench. For pentagon hydrant nuts up to 1-7/8'' and square heads up to 1-1/2''. Designed to fit 3/4'' -


Ampco Safety Tools W-72 Wrench, with Adjustable End, Non-Sparking, Non-Magnetic, Corrosion Resistant, 10'' OAL
Ampco Safety Tools W-72 Wrench, with Adjustable End, Non-Sparking, Non-Magnetic, Corrosion Resistant, 10" OAL
By Ampco Safety Tools
In Stock
$100.33
$89.18
You Save: 11%

mpn: W-72, ean: 0702535892203,

4.7 out of 5 stars with 50 reviews
Wrench Adjustable 10'' OAL.Non-Sparking, Non-Magnetic & Corrosion Resistant. Factory Mutual Approved, Made in the USA, Beryllium Free. Non-Sparking for use where flammable or combustible vapors, liquids, dust or residue are present. Non-Magnetic for use near highly sensitive magnetic equipment; MRI and Clean Room environments; Corrosion Resistant even in the most severe environments.


MLK745102 Wrench Extender Large
MLK745102 Wrench Extender Large
By Mueller-Kueps
In Stock
$147.42
$143.91
You Save: 2%

mpn: MLK745102, ean: 4260257982849,

4.8 out of 5 stars with 34 reviews
Wrench extender large.Wrench extender large. Made in Taiwan. On purchase our product, you are getting the highest quality.


Stanley Proto Facom FA-105.375 Monkey Wrench, 14-Inch
Stanley Proto Facom FA-105.375 Monkey Wrench, 14-Inch
By Stanley Proto Facom
In Stock
$46.09

mpn: FA-105.375, ean: 0662679982126,

4.2 out of 5 stars with 29 reviews
Stanley Proto FA-105.375 Facom Monkey Wrench 14-inch Satin finish provides corrosion resistance and a slip-resistant grip Sturdy, wide-opening tools for heavy-duty work on farms and building sites Fixed jaw/handle and worm gear made from hardened steel Smooth jaw faces help prevent marring of fastener surfaces.Satin finish provides corrosion resistance and a slip-resistant grip. Sturdy, wide-opening tools for heavy-duty work on farms and building sites. Fixed jaw/handle and worm gear made from


Starrett 93C T-Handle Tap Wrench, 1/4'' - 1/2'' Tap Size
Starrett 93C T-Handle Tap Wrench, 1/4" - 1/2" Tap Size
By Starrett
SKU: #HSTW-3
In Stock
$59.99
$51.00
You Save: 15%

sku: HSTW-3, mpn: 93C, ean: 0049659504293,

4.4 out of 5 stars with 37 reviews
These longer tap wrench is very handy in machine, automobile service and aviation repair shops because they eliminate the need for stocking special long taps for depths which cannot be reached with shorter wrenches. These tools are designed to hold square shanks. Round shanks can be gripped, but care must be used. Excessive tightening may break the binding nut.Starrett no. 93 T-handle tap wrench is for holding taps, drills, reamers and other small tools to be turned by hand, it is properly heat


GEARWRENCH 85063 1/2'' Drive Micrometer Torque Wrench 20-150 ft/lbs., Black
GEARWRENCH 85063 1/2" Drive Micrometer Torque Wrench 20-150 ft/lbs., Black
By GearWrench
In Stock
$94.98
$91.88
You Save: 3%

mpn: 85063, ean: 0099575850639,

4.4 out of 5 stars with 12 reviews
1/2'' Drive Micrometer Torque Wrench 20-150 ft./lbs.. Accurate in Clockwise Direction +/- 3% from 20% to 100% of full scale.Accurate in Clockwise Direction +/- 3% from 20% to 100% of full scale. Color: Black. Manufactured in China.


KNIPEX Tools 86 02 250 10-Inch Pliers Wrench Black Finish Comfort Grip
KNIPEX Tools 86 02 250 10-Inch Pliers Wrench Black Finish Comfort Grip
By KNIPEX Tools
In Stock
$71.74

mpn: 86 02 250, ean: 0843221023430,

4.2 out of 5 stars with 22 reviews
Knipex Tools 86 02 250 pliers wrench with black finish and comfort grip handles: a one-of-a kind tool that replaces a full set of inch and metric open end wrenches. Excellent for gripping, holding, pressing and bending applications. Smooth parallel gripping jaw prevents marring on work surfaces. Adjustment at the touch of a button. Zero backlash contact pressure - No damage to edges. Has 19 adjustment positions to adjust to hex nuts up to 2''. Laser marked adjustment scale to set the opening


Spud Wrench 7/8-Inch Bolt for Heavy Nut Klein Tools 3213
Spud Wrench 7/8-Inch Bolt for Heavy Nut Klein Tools 3213
By Klein Tools
In Stock
$65.42
$46.04
You Save: 30%

mpn: 3213, ean: 0640024963242,

4.6 out of 5 stars with 39 reviews
Drop-forged. High-leverage. Extra-heavy-duty head area gives maximum strength and durability. Handle features an extra-deep offset. Allows use on a range of bolt-hole sizes without bindingForged from select alloy steel to withstand high-leverage and heavy loads. Extra heavy-duty head area gives maximum strength and durability. Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding. Extra-large hub area works on larger diameter


Teng Tools - Ratcheting Podger Scaffold Wrench 19 x 22mm And 1.6 Metre Safety Wire Bundle
Teng Tools - Ratcheting Podger Scaffold Wrench 19 x 22mm And 1.6 Metre Safety Wire Bundle
By Teng Tools
In Stock
$70.99

mpn: SCAFFOLDWIRE, ean: 7426884750474,

4.9 out of 5 stars with 45 reviews
A Scaffolding Podger Wrench with. Double ended Socket with 19mm and 22mm Sizes. Pre Drilled Hole To Tether The Tool While Working At Height. 1.6 Metre Safety Wire to secure the tool to the person.Features include a locking wire a spring hook and plastic covered (3.0mm diameter) stainless steel (1.0mm diameter) spiral wire.The maximum load is 3.0 kilos.The wire stretches from 430mm to 1.6 metres. Massive Savings When Buying Together.19 and 22 mm Scaffolding Podger Wrench. Wrench has a hole in


Wright Tool 9414 16-Inch Adjustable Construction Wrench
Wright Tool 9414 16-Inch Adjustable Construction Wrench
By Wright Tool
In Stock
$62.42

mpn: 9414, ean: 0787721582991,

4.5 out of 5 stars with 7 reviews
875-9414 Features: -Opening Size: 1 19/32 in [Max]. -Opening Type: Jaw. -Head Angle: 15° Open Side. -Handle Type: Spud - Deep Offset. Use: -Adjustable Wrench. Size: -1/2''. Quantity: -Single. Measurement Type: -SAE. Product Type: -Wrenches. Generic Dimensions: -Overall Length: 16 in. Dimensions: Overall Product Weight: -2.2 Pounds.Weight 2.37. Length 16-Inch. Maximum 1 19/32-Inch. Distributing stress evenly over a larger contact area and away from the fastener corners. Reserve of strength for


Multi-function Magic Wrench Universal Adjustable auto-ratcheting works as reversible ratchet pop socket combination & pipe monkey spanner sae crescent nut gear-wrench set for craftsman & plumbers
Multi-function Magic Wrench Universal Adjustable auto-ratcheting works as reversible ratchet pop socket combination & pipe monkey spanner sae crescent nut gear-wrench set for craftsman & plumbers
By MAGIC WRENCH
In Stock
$34.98

mpn: WR-7000, ean: 8809041506456,

4.3 out of 5 stars with 11 reviews
【Magic Wrench】is an Original Korean made multi-purpose self- adjust double heads ratcheting all in one wrench ( As Seen On TV ) that automatically adapt for tightening and loosening objects in a numerous range of sizes and shapes with ratchet feature that allow a quick repeatedly clamps & releases done using one hand with better grip, it comes with plastic pouch for better protection and easy carrying and storage 【Special Design, Perfect Structure】 Magic wrench is a heavy duty high


Titan Tools 21316 18'' Strap Wrench,
Titan Tools 21316 18" Strap Wrench,
By Titan Tools
In Stock
$40.57

mpn: 21316, ean: 0802090213168,

4.5 out of 5 stars with 34 reviews
Titan Tools 21316 strap wrench utilizes a 27 inch non-marring Nylon belt to prevent scratches or damage to finished surfaces. It is able to clamp around items up to 8'' in diameter. The long 18'' handle helps users apply ample leverage to fasteners.Non-marring nylon belt prevents scratching and damage to finished surfaces. Clamp diameter: 8''. Strap length: 27''. Handle length: 18''.


High Low Speed Hand Kit Push Button with Box 2/4 Holes (2 Holes)
High Low Speed Hand Kit Push Button with Box 2/4 Holes (2 Holes)
By NSKK USdenta
In Stock
$60.90

mpn: B078768GSG, ean: 7385949134096,

4.7 out of 5 stars with 29 reviews
Packing List: 2X high speed push button hand tools 2 holes 1X New Style contra angle with blue band 1X NEW Style straight piece 1X NEW Style air motor 2 holes 1X standard push button cartridgePacking List: 2X high speed push button hand tools 2 holes 1X New Style contra angle with blue band 1X NEW Style straight piece 1X NEW Style air motor 2 holes 1X standard push button cartridge.



Viewing Page 2 of 6

View more products in Wrenches.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - dlwveteranscenter.org. All Rights Reserved.